Filter By:
- Casual Shoes (7)
- Parts & Accessories (39)
- Cycling Shoes (97)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Shoes

$495.00
Step into Wølfgar, the world’s most advanced winter cycling boot. We’ve combined decades of winter cycling experience with NASA-grade insulation materials for a boot that keeps feet warm and dry down to -25ºF. Wølfgar is a boot worthy of singletrack sessions or multi-day expeditions in the harshest winter weather.
- Our lightweight three-piece proprietary bottom assembly is compatible with both flat pedals and 2-bolt cleats, and features a rubber outsole with microglass lugs for traction on ice
- Waterproof materials and construction keep the elements out, while aerogel under the foot and over the toe block frigid air
- On the inside, Wølfgar’s reflective thermal lining retains warmth, and a removable wool and faux-fur liner wicks moisture and insulates

$450.00
From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down.
Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips.
- High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform
- Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button
- Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar.
- Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight
- Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap
- Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care.
- For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes).
- 280g for a size 156

$450.00
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it.
Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency.
Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer.
Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel.
The S-Works Torch is scientifically crafted to disappear on your feet and off the front.
- New upper features reinforcement in key zones while also offering fit zones to create a disappearing fit on the foot.
- Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe.
- By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation.
- An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit.
- Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar.
- Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments.
- Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee.
- Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals.
- Non-slip, replaceable heel tread with internally recessed screws for security.
*** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

$289.95 - $450.00
$450.00
Up to 36% Off
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it.
Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency.
Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer.
Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel.
The S-Works Torch is scientifically crafted to disappear on your feet and off the front.
- New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot.
- Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe.
- By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation.
- An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit.
- Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar.
- Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments.
- Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee.
- Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals.
- Non-slip, replaceable heel tread with internally recessed screws for security.
- IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

$450.00
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it.
Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency.
Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer.
Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel.
The S-Works Torch is scientifically crafted to disappear on your feet and off the front.
- New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot.
- Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe.
- By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation.
- An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit.
- Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar.
- Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments.
- Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee.
- Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals.
- Non-slip, replaceable heel tread with internally recessed screws for security.
- IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

$450.00
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it.
Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency.
Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer.
Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel.
The S-Works Torch is scientifically crafted to disappear on your feet and off the front.
- New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot.
- Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe.
- By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation.
- An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit.
- Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar.
- Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments.
- Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee.
- Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals.
- Non-slip, replaceable heel tread with internally recessed screws for security.
- IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

$317.99 - $425.00
$425.00
Up to 25% Off
When the moment comes for an attack in the hills, a long solo move, or a full-gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters.
- The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes.
- Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll.
- Dyneema is sandwiched between layers of synthetic mesh and TPU to create no-stretch zones for the ultimate connection and comfort.
- Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.
- Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee.
- PadLock heel construction cradles the heel and is proven to improve acceleration.
- Non-slip, replaceable heel tread with internally recessed screws for security.
- Form Fit last with a roomy toe box for the ultimate in connectivity and comfort.
- Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals.
- Approximate weight: 220g (1/2 pair, Size 42)

$399.00
Introducing Helix, the new standard in performance footwear. Bont Cycling’s race-proven anatomic fit is now even further enhanced by a newly reimagined closure system. Experience performance and comfort without compromise like never before.
- Model: Helix
- Material: Unidirectional Carbon Monocoque Chassis with Durolite upper
- Stack Height: 3.6 mm
- Air Vents: Ventilation via air vents on front bumper and perforated upper
- Innersole: EVA thermo-moldable
- Sole Guards: Replaceable
- Padding: Memory Foam
- Cleat Mounting: MM grid plus grip / 3 Hole Look Configuration
- Fit Customization: Fully Heat Moldable Chassis utilizing Epoxy Thermoset Resin
- Closing Options: BOA IP1 Dual Dial Retention System with Kevlar wiring
- Weight: 260 grams (Size 46.5)

$379.00
Lighter. Stronger. Faster. Designed for speed and comfort, the Vaypor S once again redefines the standards of pro level road cycling shoes. Bont's latest flagship shoe has been further refined to improve on their already industry leading standards. Whether you are a pro racer or simply a rider who demands the finest, the Vaypor S will provide the most anatomically and biomechanically correct platform with the most efficient power transfer platform currently available.
- 100% carbon monocoque chassis utilizing hand-laid unidirectional carbon and Bont's proprietary heat molding technology
- Duralite upper & suede leather liner
- 3.6mm stack height
- Frontal area air vents
- Innersole: EVA thermo-moldable
- Sole Guards: replaceable heel guard
- Padding: memory foam
- Fully heat-moldable monocoque chassis
- Cleat mounting: 3-hole Look configuration plus mm grid plus grip
- Closure System: Dual Dial System with replaceable Kevlar Wiring
- Weight: 230 grams (approximate weight based on size 42 shoe)

$350.00
The all-new S-Works Torch Lace delivers the timeless, refined style of a lace-up with an unprecedented level of efficiency, lightweight, and comfort thanks to Body Geometry. It all adds up to a shoe that disappears on your foot, yet begs to be seen.
Like every shoe we make, the S-Works Torch Lace starts with Body Geometry - identify a problem, solve it with design, and validate it with science - to improve comfort, increase performance, and reduce the chance of injury for every rider.
Comfort: The S-Works Torch Lace utilizes our new forefoot shape - 4mm wider than the S-Works 7 - based on extensive 3D foot scans and Retül data. The upper features remapped zonal layering throughout. It remains incredibly supple to adapt to different foot shapes, yet won’t stretch over a long day in the saddle to ensure a secure, consistent fit. An asymmetric heel counter reduces hard touch points against the ankle and still delivers knee stability validated by our Human Performance team.
Efficiency: Every Body Geometry shoe optimizes ankle, knee, and hip alignment for a stable and pedal stroke with our patented Varus Wedge, a 1.5mm outward tilt to the outsole. Thanks to the lightweight retention of laces and watching every gram - from the carbon outsole to the upper material - the S-Works Torch Lace weighs a feathery 200 grams in size 42. With an internal ‘I-Beam’ the carbon outsole provides the ideal stiffness-to-weight ratio for big efforts without adding excess grams, optimized by working with the best riders in the world.
Style: Beauty is in the eye of the beholder, and those that see the S-Works Torch Lace will get to admire them as long as they can hang on your wheel. With classic lines and understated colorways the S-Works Torch Lace is at home whether you chase finish lines or mountain tops before sunset.
- New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot.
- Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe.
- By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation.
- An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit.
- Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar.
- Laced closure maintains the most opportunity to customize fit along the entire foot.
- Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals.
- Non-slip, replaceable heel tread with internally recessed screws for security.
- Approximate weight: 200g (1/2 pair, Size 42).

$339.00
- Model: Vaypor XC
- Material: Carbon Composite chassis with Durolite Upper & Faux Seude Leather Liner
- Stack Height: 4.4 mm
- Air Vents: Frontal area air vents
- Innersole: EVA thermo-moldable
- Sole Guards: Replaceable
- Padding: Memory Foam
- Cleat Mounting: MM grid plus grip / SPD compatible
- Fit Customization: Fully Heat Moldable Chassis utilizing Epoxy Thermoset Resin
- Closing Options: Z form Velcro Straps + Boa dial (replaceable)
- Weight: 385 grams
- Color Options: Black only

$325.00
Originating from the conceptual standpoint of a mountaineering boot, the new and evolved Wölvhammer is lighter, more comfortable, and grippier. The overhauled design features a removable synthetic liner and a three-piece proprietary bottom assembly compatible with flat and clipless pedals. When the cold winter creeps in, Wölvhammer has you covered.
- Removable synthetic liner boot for quick drying
- 3-piece proprietary bottom assembly is lighter, warmer offers more walking traction
- Aerogel insulation blocks cold cleats and allows use of preferred insoles without sacrificing warmth
- 0 to 25F / -18 to -4C Comfort

$317.99
$425.00
25% Off
When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced toungless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters.
- The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features-Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes.
- Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll.
- Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort.
- Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.
- Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee.
- PadLock heel construction cradles the heel and is proven to improve acceleration.
- Non-slip, replaceable heel tread with internally recessed screws for security.
- Form Fit last with a roomy toe box for the ultimate in connectivity and comfort.
- Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals.
- Approximate weight: 220g (1/2 pair, Size 42)

$317.99
$425.00
On Sale
When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world’s best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It’s 1% faster than any shoe we’ve ever made, and at the finish line, that’s all that matters.
- The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features—Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes.
- Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll.
- Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort.
- Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.
- Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee.
- PadLock heel construction cradles the heel and is proven to improve acceleration.
- Non-slip, replaceable heel tread with internally recessed screws for security.
- Form Fit last with a roomy toe box for the ultimate in connectivity and comfort.
- Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals.
- Approximate weight: 220g (1/2 pair, Size 42)

$317.99
$425.00
On Sale
When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongue-less sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters.
- The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes.
- Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll.
- Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort.
- Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.
- Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee.
- PadLock heel construction cradles the heel and is proven to improve acceleration.
- Non-slip, replaceable heel tread with internally recessed screws for security.
- Form Fit last with a roomy toe box for the ultimate in connectivity and comfort.
- Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals.
- Approximate weight: 220g (1/2 pair, Size 42)

$279.00
The Blitz Road Shoes use Bont's industry-leading anatomical shaping and power transfer system. Combined with their 100% thermo moldable carbon chassis, they create high performance cycling shoes with unparalleled comfort at unbeatable value. Constructed with high grade Microfiber, the Blitzes stand up to the rigors of everyday cycling while mesh inserts assist with breathability. Full 3K carbon construction of the chassis ensures maximum stiffness and efficiency at an incredibly low weight. Bont Cycling's proprietary thermo moldable resin ensures the fit customization of the shoes, while the BOA dial and a forefoot velcro strap ensures micro adjustability of the fit. The Blitz is highly ventilated via integrated top mesh panels and ventilation holes throughout the side microfiber panels.

$249.95
The all-new Union BOA® Shoes are set to take your mountain bike adventures to new, more adjustable, and sendier levels of "yew!" Get more power to the pedal and customize your fit to perfection with the dual BOA® Li2 system featured in these trail-ready shoes. Built with robust features including a molded cap design to protect against rock strikes, the Union mountain bike shoes handles the rigors of trail abuse with ease.
With a lightweight and precise fit, the low-profile, custom-tuned midsole ratchets up your pedal grip and feel, giving you more comfort while you shred. Power to the pedal is optimized care of the molded internal stiffening plate, but it's not stiffness at the expense of off-bike comfort. Should you have to hike-a-bike around that downed tree, you're all good.
The sole is designed using the Ultratac™ rubber compound, with the engineered tread pattern providing best-in-class grip and durability, while the 2-bolt cleat system is compatible with most major clipless pedal suppliers. Versatile and with understated style, Union BOA® Clipless MTB Shoes were born to rip, transitioning from sweet single track to your post-ride tailgate brews with ease.
- Clipless mountain bike shoes with Boa®
- Dual Boa® Li2 system secure, on-the-fly adjustability
- Ultratac™ outsole balances grip and durability
- Reinforced toe for protection against rock strikes

$245.00
Ragnarök Tall is the remedy for cool and wet conditions. Our shoulder-season performance shoe features a waterproof membrane and tall neoprene cuff to regulate moisture and keep out mud and grit. End uncomfortable rides with Ragnarök’s unrivaled weather protection.
- A redesigned opening makes Ragnarök easy to put on and take off, and a floating three-finger overflap allows riders to dial in the perfect fit
- Ragnarök’s real rubber outsole has an aggressive tread for walking in mud and features a 2-bolt cleat mount
- Tall neoprene cuff keeps debris out
- Easy on and off
- Floating three-finger overflap allows the BOA laces to tighten where they need to for an optimal fit
- Imported

$230.00
These men's Five Ten clipless bike shoes are built for intense pedaling. The BOA® Fit System offers on-the-fly adjustments. A Stealth Marathon rubber outsole balances grip and durability. The impact-resistant toe box adds protection. Made with a series of recycled materials, this upper features at least 50% recycled content.
- Micro-adjustable dial-based BOA® Fit System plus hook-and-loop straps
- Synthetic upper with seamless overlays
- Non-slip heel cup
- Clipless shank
- Impact-resistant toe box

$230.00
Push your limits in the great outdoors. These women's Five Ten biking shoes feature the BOA® Fit System for a custom fit. Seamless overlays offer abrasion resistance through rough terrain. The clipless shank is compatible with all mountain bikes. Made with a series of recycled materials, this upper features at least 50% recycled content.
- Micro-adjustable dial-based BOA® Fit System plus hook-and-loop straps
- Synthetic upper with seamless overlays
- Non-slip heel cup
- Clipless shank
- Impact-resistant toe box

$230.00
The Recon 3.0 is all about putting the legendary performance of our S-Works Recon—power transfer, comfort, light weight, style—in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path.
Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pavé-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you’re flying up a run-up on the ‘cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer.
We know venturing off-road means venturing into the unknown, so we’ve given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud.
Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track and even more than your fair share of hike-a-bike.
- Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
- Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0)
- Fully-welded upper reduces seams for superior step-in comfort.
- Independent BOA L6-Snap dials for on-the-fly micro-adjustment.
- SlipNot rubber tread for confident traction on all terrain with removable toe studs.
- Two-bolt cleat pattern fits all major MTB pedals.
- Approximate weight: 355g (1/2 pair, Size 42)

$149.95 - $230.00
$225.00 - $230.00
Up to 35% Off
The Recon 3.0 is all about putting the legendary performance of our S-Works Recon - power transfer, comfort, light weight, style - in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path.
Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pave-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you're flying up a run-up on the 'cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer.
We know venturing off-road means venturing into the unknown, so we've given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud.
Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike.
- Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
- Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0)
- Fully-welded upper reduces seams for superior step-in comfort.
- Independent BOA L6-Snap dials for on-the-fly micro-adjustment.
- SlipNot rubber tread for confident traction on all terrain with removable toe studs.
- Two-bolt cleat pattern fits all major MTB pedals.
- Approximate weight: 355g (1/2 pair, Size 42)

$225.00
Look good, feel good, ride good—and adage as old as cycling itself… That’s the idea behind the new Recon ADV, where riding in style is just as important as the actual ride. This gravel shoe checks all the boxes in the aesthetics department but is no slouch when it comes to cranking out miles. Recon ADV is suited for the rider who values adventure, time on the bike, and needs an all-day shoe that will keep going when the gravel ends. Recon ADV’s excellent walkability is made possible by STRIDE toe-flex technology, providing a more natural feeling for off-the-bike adventuring.
Don’t let the good looks fool you, this shoe is also built inside-out with our Body Geometry technology, making it a menace on the pedals. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as inline with your knee and hips.
- STRIDE toe-flex technology allows greater toe flex for steep inclines inclines and improved walkability
- Laser perforated upper features microfiber backing for better moisture management and supple feeling
- Ride or hike in confidence with a TPU mudguard that offers protection from stone strikes
- Pontoons create a stable pedal platform as well as aiding walking feel
- Greater SlipNot rubber tread coverage on sole that’s optimized for gravel traction
- Features proven Body Geometry technology like the Varus Wedge to maintain efficient and comfortable hip, knee, and foot alignment while riding

$220.00
Designed to withstand the elements and provide comfort on rugged trails, the Trailcross GTX Flat Shoe blends a durable, hiking-inspired build with a high friction Stealth Phantom rubber outsole.
- Bike and Hike outsole: designed for grip at the toe and heel while maintaining a pedal platform under foot
- Weather-friendly GTX (Gore-Tex) mesh upper for breathability and comfort
- Textile-free and closed cell sockliner
- Lace tuck on the middle of the tongue
- Neoprene cuff keeps debris out
- Non-marking Phantom Dotty outsole for grip on and off the bike
- Midsole flex points allow flex while hiking but keep stiffness while on the pedal

$209.95
$325.00
35% Off
On gravel, style is a state of mind. The new S-Works Recon Lace will put a smile on your face and style in your pace every time you head out the door. A timeless look combined with tried and true Body Geometry features and the performance and durability that have become hallmarks of S-Works Recon shoes. Plus, you’ll leave everyone in the group asking, "What shoes are those?"
- Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency; optimize hip, knee, and foot alignment; and reduce injury risks.
- Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0.
- PadLock heel construction cradles the heel and is proven to improve acceleration.
- Titanium alloy cleat nut.
- SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs.
- Form Fit last with a roomy toe box for the ultimate in connectivity and comfort.
- Two-bolt cleat pattern fits all major MTB pedals.

$209.95
$325.00
35% Off
On gravel, style is a state of mind. The new S-Works Recon Lace will put a smile on your face and style in your pace every time you head out the door. A timeless look combined with tried and true Body Geometry features and the performance and durability that have become hallmarks of S-Works Recon shoes. Plus, you’ll leave everyone in the group asking, “What shoes are those?”
- Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks.
- Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0.
- PadLock heel construction cradles the heel and is proven to improve acceleration.
- Titanium alloy cleat nut.
- SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs.
- Form Fit last with a roomy toe box for the ultimate in connectivity and comfort.
- Two-bolt cleat pattern fits all major MTB pedals.

$195.00
Designed specifically for cool and wet conditions, Ragnarök provides a high level of water resistance, moisture regulation, and comfort in a performance cycling shoe. Constructed with a BOA closure, waterproof membrane, and rubberized shell that extends above the ankle, Ragnarök delivers unrivaled weather protection in the wettest and muddiest of conditions.
- Hook-and-loop neoprene ankle
- BOA closure with IP1 low power reel
- Works with 2-bolt mountain compatible cleats
- Black finish
- 25ºF+ / -3ºC+ Comfort

$189.00
Bont Riot MTB+, the world's first carbon-composite, heat-moldable, entry-level MTB shoe, now available with BOA retention system.
The Riot MTB+ combines Bont's pro series technical features including our power transfer platform for greater efficiency, replaceable sole guards, unique anatomical shaping with competition grade materials and BOA retention system to create the most technically advanced entry level MTB shoe.
- Model: Riot MTB+
- Material: Carbon composite construction with microfiber upper
- Stack Height: 4.8 mm
- Air Vents: Ventilations holes through upper and mesh inserts
- Innersole: Comfort
- Sole Guards: Replaceable
- Cleat Mounting: MM grid plus grip / SPD compatible
- Fit Customization: Fully Heat Moldable Chassis utilizing Epoxy Thermoset Resin
- Closing Options: Z form Velcro strap and Boa dial system
- Weight: 385 grams

$180.00
The pinnacle model within the Freerider family, the Freerider Pro VCS Mid includes upgraded features, including D30 ankle protection and a PRIMEKNIT ankle cuff to keep debris out. This shoe is for the all-mountain rider looking for added protection, quick-drying materials and unbeatable grip to keep them going over any trail.
- Synthetic upper with impact resistant toe box for protection from trail hazards
- Compression-molded EVA midsole balances pedal feel and power output
- Hook-and-loop closure straps
- D30 inner ankle protection
- Primeknit ankle cuff keeps out unwanted debris from the trail
- Stealth S1 dotty rubber outsole for unbeatable grip

$180.00
Mountain bike shoes for aggressive, gravity-fueled riding.
Downhill or enduro, these adidas Five Ten Hellcat Pro Mountain Bike Shoes offer all-conditions control for gravity-fueled riding. Cleat-compatible with a stiff midsole, they allow for aggressive pedaling. A synthetic upper with abrasion-resistant weldings provides extra durability. Non-marking Stealth Marathon rubber grips pedals and ground alike.
This product is made with recycled content as part of our ambition to end plastic waste. 20% of pieces used to make the upper are made with minimum 50% recycled content.
SPECIFICATIONS
- Regular fit
- Lace and hook-and-loop closure
- Textile upper
- Molded sockliner
- Abrasion-resistant weldings
- Clipless-compatible
- Stealth Marathon rubber outsole
- Imported
Page 1 of 5
Next page