Optimized for both side and direct bottle entry, Zipp's Alumina cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle. - 27 grams
Zipp's SL Speed Carbon Bottle Cage features an ultra-light (18g) design engineered for flexibility and strength. Optimized for both side and direct bottle entry the SL Speed cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle.
Wind-tunnel testing shows that a bicycle with XLAB's Aero TT Cage and Bottle System on it is 25% more aero than with a round bottle, meaning it will shave up to 20 seconds off a 40K bike leg or time trial. The high grip cage holds the bottle securely, and the non-slip surface with an easy-grip groove makes it easy for you to get the bottle out. The included XLAB 20-ounce aero bottle is BPA-free. - NEW! Stealth black bottle color. Match your black Torpedo Bottle or kit-match your bike! - Carbon cage securely grips bottle - Save up to 64 seconds on Full Race distance - 50% Less Drag than round bottles - Special XLAB Hi-Grip Deep Pocket carbon cage
Replacement Spare Bottle for Aero TT System - BPA free - High grip sides - Aero-weenies rejoice with 50% less drag than round bottles - Ideal 20oz (590ml) capacity for a gel/water mix - Save up to 64 seconds on Full Race distance - 20 oz (590mL)
XLAB's Aqua Shot Calibrated Bottle has helped athletes win world championships and it'll help you perform your best, too. This unique, time-saving racing bottle has a high-flow squeeze valve and 4-ounce gradations so you can gauge your hydration. It's made of taste-free and safe BPA-free polyethylene with a fast-flow silicone valve that seals tight as soon as you stop squeezing. The valve is also not exposed to dust or contamination. This fine bottle is dishwasher top-shelf safe, can be used with carbonated beverages and is even shaped to fit better in bottle cages.
XLAB's Chimp Carbon Cage weighs only 36 grams and firmly holds your bottles in place, even over bumpy terrain thanks to 5 pounds of gripping force. It's specifically designed for use with tri bikes and other aero rigs with smaller front triangles that make grabbing bottles from ordinary cages difficult. The Chimp Cage's 30-degree cutoff lets you pull your bottles out at an angle for improved ease of use. Plus, this light carbon cage grips great and has supportive top and bottom tabs so you'll never lose a bottle.
- High-tech insulated racing bottle keeps liquids cool - Ultra secure groove latches onto XLAB cages to prevent launching - Capacity: 20oz (600ml)
• AERODYNAMIC LOCATION - Mounts to saddle, hiding in body’s draft • HIGHLY ADJUSTABLE - Can adjust cage angle and cage height for a perfect custom position • STABLE DESIGN - Stiffest mount on market with alloy arms • FLARED CAGE DESIGN - Makes inserting bottle easy • HIGHEST GRIPPING CAGE - 14 lbs grip on bottle to prevent bottle launches • ANTI-VIBRATION - Locking hardware for safety and security • REPAIR STORAGE OPTIONS - Compatible with AERO POUCH 300 BAG or MULTI-STRIKE REPAIR HOLDER (each sold separately) • Aircraft aluminum mount • Carbon fiber bottle cage • Weight: 141.5 grams Why single rear carriers? • Replaces frame bottle: Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The DELTAs are mounted on the saddle rails for no measurable drag. • Refills front drink system: Use the DELTAs to refill a front drink system. Just bring the spare bottle forward from the DELTA and refill. If you have the popular XLAB TORPEDO aerobar mounted system (sold separately), then simply replace the empty front bottle with the spare bottle from the DELTA. • Adds an extra bottle: These systems are also ideal for longer training rides or century rides, where an extra bottle is necessary so you can have your favorite mix with you at all times.
The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.
XLAB's Gorilla Carbon Cage is one of the most popular rear bottle cages on the market! It boasts an amazing 7-pound grip force to keep bottles in place on bumpy roads and it's been specifically tweaked to work perfectly with saddle-mounted cage carriers. The Gorilla has over two times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit.
XLAB's Gorilla XT Carbon Cage is perfect for mountain bikes, rear-mounted carriers and other high-stress hydration situations. The XT has over 4 times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit. It boasts an amazing 14-pound grip force on bottles.
Torpedo innovation meets vertical bottle design. Brand new 28-ounce (828mL) hydration system with minimal frontal area. Includes composite mount and clamps, splash-proof lid over quick-fill opening, straw with bite valve, and Hydroblade bottle. All-in-one system for one great price! The Hydroblade is for casual mountain biking with front suspension forks. The most convenient, complete vertical hydration system available. - Safer riding - no reaching down for your bottle - Easily refuels. Simply lift lid and fill using wide mouth, quick-fill opening - Bite valve keeps straw full for quick drinking - Comes complete with easy clip-on clamps for triathlon and TT Bars - Mount the Hydroblade on MTB, fitness, drop or flat bars using the Hydroblade Universal Mount, available separately. - Fits widest range of bars – 80-160mm (center-to-center) Easy to Drink and Refill - Hands-free drinking. Simply sip from the straw, keeping your eyes on the road ahead. - NEW ClickCover! ClickCover designed with grippy pull-tab for opening. Simply pop open and refill via Split Cap. Insert bottle nozzle into aperture for fast, quick refill. - Comes with two cap styles! System also includes highly-acclaimed classic Torpedo Clear Cap. Wide mouth, quick-fill opening also makes mid-ride refill of tablets or powder a breeze. - Top-of-the-line bite valve decreases bloating by reducing air intake when sipping - Flat bottom allows bottle to stand upright on counter when filled Clean, Aerodynamic Design - Computational Fluid Dynamics (CFD) optimized aerodynamic shape to minimize system drag - Flow straighteners molded in for added drag reduction Highly-Acclaimed Megadjust Mounting - Securely adjusts to widest range of cockpit configurations 80mm-160mm (center-to-center) - Accommodates up to 20° of aerobar extension rotation SecureClip Brackets - Clips onto aerobar extensions for a clean bike aesthetic. Eliminates need for extra zip-ties, rubber bands or electrical tape to prevent rocking or tilting - Fits 22.2 diameter aerobar extensions
XLAB's Mezzo Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 750ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.
XLAB's Mini Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 500ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.
Kit-match with a new customizable high-grip carbon cage! Customize Your Cage Colors - Personalize your look with Raptor Talons available in multiple colors - High-grip carbon cage with approx 6lbs grip force - Svelte design for a streamlined look - Weight: 1.0oz (30g) - Pair with the hyper-reflective Cool Shot insulated bottle Grip Force - Approx 6lbs grip force for excellent bottle retention Optimized Carbon - Unidirectional carbon inside and 3K carbon weave outside Ideal Uses - Road - Triathlon (Aerobar and Frame) - Gravel - Mountain - Weight: Approx 30g (1.07oz) - Grip: Approx 6lbs - Construction: Carbon Fiber - Includes: Corrosion resistant Black Zinc screws - Warranty: Limited 3 Year
Having trouble getting your bottle out of your cage? Upgrade to XLAB's Sidekick Carbon Cage! It's specifically designed for use with aero frames, tri bikes and other rigs with small front triangles. Plus, its side-loading design lets you slip your bottle in and out at a comfortable angle so you won't have to struggle with a stuck bottle ever again. It's also crafted from carbon for an impressive weight of only 34 grams. And, it boasts a whopping five pounds of grip force so it keeps bottles in place over even the roughest pavement. - Ideal for fastest frame bottle access and for small frames - Low cut sides for rapid bottle removal and insertion - Wide center opening permits sides to flex outwards for easy bottle withdraw - Special flared entry lip for fast bottle access and insertion - Long thick lower shelf prevents large heavy bottles falling through cage bottom or breaking off tab - Matches XLAB Gorilla cages rear carrier Anti-Launch, and Chimp cages
XLAB's Torpedo Carbon Cage is designed specifically for their horizontal aero bar hydration mounts. Use with a standard bottle or XLAB's new Torpedo model (mounts and cages sold separately). The cage is made of ultra-light carbon, holds bottles securely and is super easy to use. It features a 5-pound grip force on bottles so they stay put over even the roughest roads.
Keep your hydration right between your arms and your computer at a glance. Easy-to-install system stacks hydration and ride data into one simple design. - Upgraded computer mount takes on rougher road conditions. 3X stiffer than original Kompact 100. - Just add your choice of beverage: Includes calibrated, squeeze-and-squirt Aqua-Shot Racing Bottle - SecureClip Brackets Install in an Instant: No ugly cable-ties, rubberbands or electrical tape needed to secure system: SecureClip brackets simply 'clip on' and Velcro down to aerobars - On top Garmin and Wahoo computer mount gives quick-glance bird's-eye-view of your cycling data - High-grip design holds bottles tight – yet bottle insertion and removal is easy All Inclusive System - Comes with everything you need – mounting plate, Garmin and Wahoo computer mount for Garmin bike computers or multisport watches, cage and bottle No-Fuss Installation, Comes Fully Assembled - No Zip-ties, rubber bands or need to concoct your own mounting solution required – simply clip-on and Velcro-down - Clean, 'snap' on XLAB SecureClip brackets eliminate rattling and shifting - Megadjust means the widest adjustment range available, fitting aerobars 70mm-150mm (center-to-center) apart Data Right Where You Need It - Designed for easy placement of Garmin bike computers, Garmin Forerunner and Fenix watches w/ Simple Quarter Turn interface, and Wahoo bike computers Rear Offset Design - While bulkier systems limit hand placement and force your hands into limited pockets – the short, compact design (just 145mm / 5.7in) clears the aerobars for more, comfortable hand positions - Reversible design easily allows for repositioning if you'd rather pull the bottle towards you than away. - Perfect for shorter aerobars – rear offset design moves bottle weight over stem and doesn't require a significant amount of space from your aerobars - Improves bike handling compared to systems that load weight onto aerobars Easy Glide Cage Design - Specially designed side cutouts enable fast bottle withdraw and entry. Available in black or red Drink Fast with Self-Sealing Nozzle - No need to open bottle nozzle with your teeth. Simply stop squeezing and the nozzle seals itself. - Compatibility: Wahoo and GARMIN-specific - Capacity: Includes 25oz (740ml) clear AQUA-SHOT bottle - Adjustment Range: 70mm-150mm (center-to-center) - Weight: 177g (without bottle or computer) - Length: 145mm/5.7 inches - Bottle Grip Force: 4lbs Construction - Bottle: Clear, lead free, BPA-Free and HDPE food safe certified bottle - Mounting Plate: Aluminum Alloy - Cage: Nylon Composite VULCAN CAGE - Brackets: Nylon Composite with Velcro Straps coated with non-slip extension grip Warranty: - 2 Year Limited Warranty
High-performance simplicity. New carbon design leverages the groundbreaking, award-winning design of the Torpedo Kompact 100 for an even lighter weight, sleeker and more rough-road durable hydration system. - NEW unidirectional high-modulus carbon mounting plate - Includes NEW high-grip carbon Raptor Cage, color-customizable to suit your setup - Just add your choice of beverage: Includes hyper-reflective Cool Shot bottle to keep liquids super cool - SecureClip Brackets Install in an Instant: No ugly cable-ties, rubber bands or electrical tape needed to secure system: SecureClip brackets simply clip on and Velcro down to aerobars - On top Garmin computer mount gives quick-glance bird's-eye-view of your cycling data All Inclusive System - Comes with everything you need – mounting plate, Garmin-specific computer mount, cage and bottle No-Fuss Installation - Torpedo Kompact 500 comes fully assembled - No Zip-ties, rubberbands or need to concoct your own mounting solution required – simply click-on and Velcro-down - XLAB SecureClip brackets eliminate rattling and shifting. Fits 22.2mm diameter aerobar extensions. \ - Megadjust means the widest adjustment range available, fitting aerobars 70mm-150mm (center-to-center) apart Data Right Where You Need It - Designed for easy placement of Garmin bike computers, Garmin Forerunner and Fenix watches w/ Simple Quarter Turn interface (check Compatibility tab for specifics) Rear Offset Design - While bulkier systems limit hand placement and force your hands into limited pockets – the short, compact design (just 145mm / 5.7in) clears the aerobars for more, comfortable hand positions - Perfect for shorter aerobars – rear offset design moves bottle weight over stem and doesn't require a significant amount of space from your aerobars - Improves bike handling compared to systems that load weight onto aerobars Kit-Match with a Color Customizable Cage: - Color match your bike kit! Insulated Bottle - Hyper-reflective Cool Shot insulated bottle keeps liquids super cool Highest Bottle Grip of Kompact Series - 6 lb grip force is durable for rough road conditions: Carbon anti-launch design increases grip force - Capacity: Includes 20oz (600ml) XLAB COOL SHOT insulated bottle - Adjustment Range: 70mm-150mm (center-to-center) - Weight: 154.4g (without bottle or computer) - Length: 145mm - Bottle Grip Force: 7lbs Construction - Bottle: Lead free, BPA-Free and HDPE food safe certified bottle - Mounting Plate: Carbon - Cage: Carbon chassis, polycarbonate RAPTOR TALON cage ends - Brackets: Nylon Composite with Velcro Straps coated with no-slip extension grip
Contains all of the essential spare parts to freshen your Torpedo. - Includes: 2 Refill Lids, 2 Straw Plugs (Clear Solid and Black Slotted), Straw with Drink Valve and Dolphin Tail Screw.
New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.
Torpedo System 50+ is the perfect refillable aerobar hydration system for the beginner triathlete. Unbeatable price + top features outshine any competitive choice. Includes: - Bottle and Bottle Accessories: Bottle, Straw with Bite Valve, Slotted Lid, Spare Straw Hole Plug - Nylon Composite Vee Cage - Aluminum Torpedo Mini Mount - Mounting Accessories: (4) XTS Mounting Straps Easy to Ride - Stop reaching down to frame bottles for a drink. Keep both hands on the aerobars and simply take a drink from a straw positioned directly under your mouth. Easy to Drink & Refill - 2 possible straw locations to customize your setup - Drink Valve makes drinking even faster by keeping fluid ready near top of straw. - Split Refill Lid allows for easy refilling while on-the-go. Wide diameter allows for on-course Aid Station Bottles for easy mid-race refills. - No lid to flip out of the way, just simply put the full bottle into the easy access split refill hole. Easy to Clean - One-piece body ensures no leaking! - Bottle made in the USA and is lead free, BPA-Free and HDPE food safe certified - TRUE 26 oz bottle capacity (768 mL) Quick Install - Adjustment width fits bars 80mm – 130mm (center-to-center) - No tools required for fast installation and removal. Simply loop straps around aerobar extensions and tighten. Easier to Handle in Winds - Bottle designed to mount further back allowing easier steering for the rider No Need to Sacrifice Aerodynamics Even at the Entry-Level - Aerodynamically Invisible bottle design used by all XLAB Torpedo Systems - Contoured design to fit your arm shape. - Small frontal area that allows a clean airflow around the bottle - Kamm tail. Reduces drag by 50% - Airflow straighteners designed into the bottle to gather airflow for a clean, straight exit air flow
Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in—but doesn’t let water out. - Capacity: 26oz (768 mL) - Construction (Versa Mounting Plate): 16-layer unidirectional carbon fiber - Construction (Cage): Carbon Torpedo Cage - Construction (Computer Mount): Nylon Composite - Construction (Bottle): Lead free, BPA-Free and HDPE food-safe certified bottle - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 8.4oz (240g)
Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)
Carbon BTA hydration mount compatible with Torpedo Versa (sold separately). 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 16-layer unidirectional carbon fiber - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)
High-performance cage at a low price point! Large area bottom hook supports large bottles with Side cutouts to enable fast bottle withdraw and entry. High-performance cage at a low price point! - Large area bottom hook supports large bottles - Extra sturdy high resistance techno polymer design - Made in Italy with the finest Italian quality - Pair with the hyper-reflective Cool Shot insulated bottle (sold separately) Grip Force - Approx 4lbs grip force Ideal Uses - Road - Triathlon (Aerobar and Frame)
- The Wolf Tooth Morse Cage is a lightweight and low profile way to reposition bottle cages. - Named for its dot-dash-dot-dash mounting pattern, the Morse Cage base plate offers four positions across 32mm of vertical adjustment, fully capturing one mounting bolt in every position to prevent movement. - Can be bent back into shape if damaged, and is available in both titanium and stainless steel
- Whisky Carbon Water Bottle Cage - Cage Material: Carbon - Mount Type: Bolt-On - Weight: 28 grams (C3), 25 grams (C2), 30 grams (C1)
The No. 9 Side Entry Cage by Whisky Parts Co. melds convenience, form, function, and light weight. It's full-carbon design securely grips your bottle, and side entry cages allow access to your bottle on small frames or when using frame bags.
Ready to freshen up your water supply? Reach for the gold with the Whisky Prospector insulated water bottle. - Insulated for temperature optimization - Purist technology shields the inside of the bottle from any bad taste, mold, or staining - Squeezable materials allow for unmatched flexibility and comfort
Page 1 of 8 Next page